Skip to content
Athexo

Supports, tripods and mounting

{"en":"Tripods, clamps, masts, extrusions and outdoor microphone protection. The mechanics that hold a measurement still while the wind blows.","it":"Treppiedi, morsetti, pali, profili e protezione del microfono all'aperto. La meccanica che tiene ferma la misura mentre tira vento."}

Categories
Purchasable now only

34 results Clear

ATX-EXP-107-V01

Anti-vandal cage for fixed stations

Urban monitoring in exposed locations. Planned variants: microphone only, microphone and enclosure, whole station.

€590,00 Details →
ATX-EXP-100-V01

Bird deterrents

A gull landing on the microphone invalidates a week of data. Planned variants: 6-spike crown, 12-spike, spiral version.

€90,00 Details →
ATX-EXP-173-V01

Boom arm for tripods

The microphone away from the tripod that reflects it. Planned variants: 0.5 / 1.0 / 1.5 m.

€240,00 Details →
ATX-EXP-106-V01

Bracket for existing poles (street lights, signposts)

Mounting on what is already there, with no building work. Planned variants: 60-100 mm, 100-160 mm, 160-250 mm diameter.

€190,00 Details →
ATX-EXP-110-V01

Camouflage cover for urban stations

Fewer thefts and less curiosity during long monitoring. Planned variants: urban grey, green, custom.

€140,00 Details →
ATX-EXP-174-V01

Clamps for poles and pipes

Fixing to whatever is there: railings, poles, pipes. Planned variants: 20-50, 50-100, 100-200 mm diameter.

€140,00 Details →
ATX-EXP-096-V01

Complete outdoor kit for long-term monitoring

Dome, windscreen, bird spikes and desiccator, assembled and tested. Planned variants: 30 days, 6 months, permanent.

€1.890,00 Details →
ATX-EXP-109-V01

Facade fixing kit for a microphone at 2 m

A stable position for campaigns lasting several days. Planned variants: anchor bolt, clamp, magnetic.

€240,00 Details →
ATX-EXP-183-V01

Heavy floor base

A stable indoor support without a bulky tripod. Planned variants: 8, 15, 25 kg.

€240,00 Details →
ATX-EXP-103-V01

IP66 enclosure for the front end

Electronics in the field for months, with membrane vent and cable glands. Planned variants: 200x150, 300x200, 400x300 mm.

€340,00 Details →
ATX-EXP-178-V01

Joining kit for V-slot

Brackets, T-nuts, screws: the small parts that are always missing. Planned variants: starter, medium, complete.

€140,00 Details →
ATX-EXP-182-V01

Levelling kit with bubble level and screws

The "roughly level" that invalidates a vibration measurement. Planned variants: 3 screws, 4 screws, with bullseye level.

€140,00 Details →
ATX-EXP-176-V01

Magnetic brackets for steel structures

Industrial sheds and plant rooms. Planned variants: 30 / 80 / 150 kg — flat or V-groove.

€190,00 Details →
ATX-EXP-105-V01

Mast anchoring kit

A mast that falls over is the most expensive cost of the whole campaign. Planned variants: 3 x 15 kg ballast, three-point guy lines, ground stakes.

€390,00 Details →
ATX-EXP-172-V01

Micrometric head for microphone positioning

Repeating the position to the millimetre across two campaigns. Planned variants: 2 axes, 3 axes, with graduated scale.

€590,00 Details →
ATX-MET-001

Microphone weather box

Microphone protection for long monitoring campaigns — the ones that stay outdoors for days or weeks and take rain, wind and dust.

€280,00 Details →
ATX-EXP-179-V01

Modular counterweights and ballast

A tripod that does not blow over. Planned variants: 5, 10, 15 kg — bags or discs.

€90,00 Details →
ATX-KIT-001

Mounting kit for outdoor measurements

Kit for fixing microphone and source where they actually need to go: facades, poles, balconies, parapets. Today you make do with whatever is left in the van.

€340,00 Details →
ATX-EXP-181-V01

Multi-position microphone bar

Several microphones on one support, at known distances. Planned variants: 3, 5, 8 positions — 0.5 / 1.0 / 1.5 m.

€290,00 Details →
ATX-EXP-108-V01

Nose cone for in-flow measurements

Measuring inside ducts without self-induced noise. Planned variants: 1/2", 1/4".

€240,00 Details →
ATX-EXP-097-V01

Open-cell polyurethane windscreen

A consumable that degrades in sunlight: here with a declared density. Planned variants: 50 / 60 / 90 / 175 / 300 mm diameter — standard or hydrophobic.

€90,00 Details →
ATX-EXP-180-V01

Quick-release plates

Mounting and dismounting twenty times a day. Planned variants: Arca standard, Manfrotto standard, proprietary.

€90,00 Details →
ATX-EXP-099-V01

Rain dome for upward-facing microphones

The microphone looks up and takes water: solved without altering the response. Planned variants: 120 / 200 mm diameter — with and without deflector.

€190,00 Details →
ATX-EXP-102-V01

Rechargeable desiccant cartridges with indicator

Planned maintenance instead of a failure. Planned variants: 10 / 30 / 100 g — packs of 5 or 20.

€60,00 Details →